Home Science Advancing Moon Landings With NASA Supercomputers

Advancing Moon Landings With NASA Supercomputers

0
Advancing Moon Landings With NASA Supercomputers

Apollo 12 Lander Lunar Surface Simulation

NASA’s Artemis missions, aimed at extending lunar exploration, face new challenges with larger landers that pose greater operational risks. These missions must navigate complex lunar landings and liftoffs in an environment with unique challenges, such as low gravity and a dusty surface. Credit: Patrick Moran, NASA Ames Research Center/Andrew Weaver, NASA Marshall Space Flight Center

NASA’s Artemis missions, using larger lunar landers, face increased landing and liftoff risks. NASA’s Marshall Space Flight Center developed simulation tools to predict and manage these challenges, ensuring safer lunar missions. These tools have been successfully validated against historical Apollo mission data.

Through Artemis, NASA plans to explore more of the Moon than ever before with human and robotic missions on the lunar surface. Because future landers will be larger and equipped with more powerful engines than the Apollo landers, mission risks associated with their operation during landing and liftoff is significantly greater. With the agency’s goal to establish a sustained human presence on the Moon, mission planners must understand how future landers interact with the lunar surface as they touch down in unexplored moonscapes.

The Complexities of Lunar Landings

Landing on the Moon is tricky. When missions fly crew and payloads to the lunar surface, spacecraft control their descent by firing rocket engines to counteract the Moon’s gravitational pull. This happens in an extreme environment that’s hard to replicate and test on Earth, namely, a combination of low gravity, no atmosphere, and the unique properties of lunar regolith – the layer of fine, loose dust and rock on the Moon’s surface.


Researchers at NASA’s Marshall Space Flight Center in Huntsville, Alabama produced a simulation of the Apollo 12 lander engine plumes interacting with the lunar surface. This animation depicts the last half-minute of descent before engine cut-off, showing the predicted forces exerted by plumes on a flat computational surface. Known as shear stress, this is the amount of lateral, or sideways, force applied over a set area, and it is the leading cause of erosion as fluids flow across a surface. Here, the fluctuating radial patterns show the intensity of predicted shear stress. Lower shear stress is dark purple, and higher shear stress is yellow. Credit: Patrick Moran, NASA Ames Research Center/Andrew Weaver, NASA Marshall Space Flight Center

Risks and Challenges Posed by Landing and Liftoff

Each time a spacecraft lands or lifts off, its engines blast supersonic plumes of hot gas toward the surface and the intense forces kick up dust and eject rocks or other debris at high speeds. This can cause hazards like visual obstructions and dust clouds that can interfere with navigation and science instrumentation ­or cause damage to the lander and other nearby hardware and structures. Additionally, the plumes can erode the surface under the lander.

Although craters were not formed for Apollo-scale landers, it is unknown how much the larger landers being planned for upcoming Artemis missions will erode the surface and whether they will rapidly cause cratering in the landing zone, posing a risk to the lander’s stability and astronauts aboard.

NASA’s Advanced Simulation Tools

To improve its understanding of plume-surface interactions (PSI), researchers at NASA’s Marshall Space Flight Center in Huntsville, Alabama, have developed new software tools to predict PSI environments for NASA projects and missions, including the Human Landing System, Commercial Lunar Payload Services initiative, and future Mars landers. These tools are already being used to predict cratering and visual obscuration on upcoming lunar missions and are helping NASA minimize risks to spacecraft and crew during future landed missions.

Validating Simulations with Apollo Data

The team at NASA Marshall recently produced a simulation of the Apollo 12 lander engine plumes interacting with the surface and the predicted erosion that closely matched what happened during landing. (See video above.) This animation depicts the last half-minute of descent before engine cut-off, showing the predicted forces exerted by plumes on a flat computational surface. Known as shear stress, this is the amount of lateral, or sideways, force applied over a set area, and it is the leading cause of erosion as fluids flow across a surface. Here, the fluctuating radial patterns show the intensity of predicted shear stress. Lower shear stress is dark purple, and higher shear stress is yellow.

These simulations were run on the Pleaides supercomputer at the NASA Advanced Supercomputing facility at NASA’s Ames Research Center in California’s Silicon Valley over several weeks of runtime, generating terabytes of data.

Used for this research, the framework for the Descent Interpolated Gas Granular Erosion Model (DIGGEM) was funded through NASA’s Small Business Innovation Research program within NASA’s Space Technology Mission Directorate (STMD) in Washington, and by the Stereo Cameras for Lunar Plume Surface Studies project that is managed by NASA’s Langley Research Center Hampton, Virginia also funded by STMD. The Loci/CHEM+DIGGEM code was further refined through direct support for flight projects within the Human Landing System program funded by NASA’s Exploration Systems Development Mission Directorate (ESDMD) in Washington as well as the Strategy and Architecture Office in ESDMD.

LEAVE A REPLY

Please enter your comment!
Please enter your name here